Radio, mains adaptor, quick start guide and safety/warranty leaet.
Features
Controls
continued overleaf...
STEP 1 - Plug in & play DAB radioWhat is in the Box?
• DAB / DAB+ / FM RDS wavebands
• 2 alarm timers, wake to DAB, FM radio or buzzer
• Station name / multi preset mode
• One touch instant access to favourite station
• Fifties styling
• Adjustable sleep and snooze timers
• FM RDS station name display
• Bass and treble control
• AC adaptor included / Batteries 4 x AA size / LR6 (not included)
• Stereo auxiliary input, line out and headphone sockets
A - Connect to the mains
B - Switch on your radio
C - Select a DAB radio station
Please read the safety leaet provided before connecting your radio to the mains.
1 Place your radio on a at surface.
2 Fully extend the telescopic aerial located on the top right hand
corner.
3 Plug the cable from the mains adaptor into the DC input socket.
Plug the mains adaptor into a wall socket and switch on the socket.
4 A start up screen will be displayed and a station scan will be performed.
5 When a signal has been found, the current time will appear on the
display.
Note: If no signals are found it may be necessary to relocate your
radio to a position giving better reception and carry out a scan for
new stations.
1 On/Off / Volume control
2 Headphone socket
3 Auxiliary input socket
4 Favourite button
5 Mode / Alarm button
6 Menu button
7 Auto Tune button
8 Info / Dimmer button
9 Preset button
10 Telescopic aerial
11 Tuning / Select / Snooze control
12 LCD display
13 Low battery indicator
14 Loudspeaker
15 DC input socket
16 Line output socket
17 Battery compartment
18 Micro USB socket for service use only
(inside battery compartment not shown)
2 3 5 6 7 8 9
10
11
12
4
13
14
1
1615
17
D - Scan for DAB stations
Preset radio stations
As time passes new stations may become available or you may have
moved to a different part of the country.
1 Press and release the Mode button until DAB is selected.
2 Press the Auto Tune button.
3 Your radio will perform a scan of the Band III DAB channels. As
new stations are found, they will be added to the list stored in the
radio.
1 Press the On/Off control to switch on the radio. After each use
the radio will remember the mode used and then switch on in that
mode the next time it is used.
2 If this is the rst time the radio is used a scan of the Band III DAB
channels will be carried out (depending on whether a scan was
completed in standby mode).
1 If needed, press and release the Mode button until the DAB mode
is selected.
2 Rotate the Tuning control to step through the list of available DAB
stations.
3 Press the Tuning control to select the station. Adjust the Volume.
4 Some radio stations may have one or more additional broadcasts
associated with them. If these are available they will appear
immediately after the main station.
5 Press the Info button to cycle through the various display options.
The display options are scrolling text, program type, station name,
time, date, channel / frequency, bit rate, audio type and signal
strength (the minimum signal marker (
) shows the minimum
strength needed for good DAB reception).
Note: All displays except the text display will revert to the clock
display after about 10 seconds.
A - Search tuning - FM
B - Manual tuning - FM
1 Fully extend the telescopic aerial.
2 Press and release the Mode button until FM is selected.
3 Rotate the Tuning control clockwise or anti-clockwise and press
the Auto Tune button. Your radio will scan upwards (low to high
frequency) or downwards (high to low frequency) and will stop
automatically when it nds a station of sufcient strength.
4 If the signal is strong enough and there is RDS data present
then the radio will display the station name.
5 Adjust the Volume.
• Press the Info button to cycle through the various display options.
The display options are station name, scrolling text, program
type, frequency, audio type, time and date.
Note: All displays except the text display will revert to the clock
display after about 10 seconds.
1 Rotate the Tuning control to tune to a station. The frequency
will change in steps of 50 kHz.
2 Adjust the Volume.
STEP 2 - Play FM radio
DAB
DAB
FM
It is recommended that the DAB band be used wherever possible as better results in terms
of quality and freedom from interference will usually be obtained than on the FM band.
Menu options
1 You can access your radios menu system by pressing the Menu
button.
2 Use the Tuning control to select menu options.
3 To exit menus press the Menu button as needed.
To make it easier for you to tune your radio to the stations that you prefer, you may store selected radio
stations as presets. Your radio holds presets separately for DAB and FM radio modes.
You may set as many or as few presets as you like in each mode.
You can easily switch between displaying all DAB stations (or all FM frequencies) and displaying only
those that you have set as presets.
Any station or frequency which has been marked as a preset can easily
have the mark cancelled should your preferences or needs change.
Presets are retained when your radio is switched off.
1 To setup your preset stations, tune into the required station.
2 Apply a long press on the Preset button so that the tick symbol
shows in the display. This indicates that the radio station is marked
as a preset. To cancel the preset mark, apply a long press on
the Preset button again.
3 Repeat steps 1 and 2 as needed for any other stations that you
want as presets.
4 To view only the preset stations for the currently selected waveband
when tuning, press and release the Preset button so that the
heart symbol shows in the display.
5 To listen to one of the preset radio stations, rotate the Tuning
control until the required radio station is displayed. The radio will
automatically tune to that station.
6 To cancel the preset stations view, press and release the Preset
button so that the heart symbol disappears from the display. Your radio will then be able to access
the full station list using the Tuning control.
DAB
DAB
Favourite
FM
Your radio has a favourite button which will automatically select
the required waveband and tune to your favourite radio station.
1 Tune to the required station. Apply a long press on the
Favourite button (for 5 seconds) until the display shows
'SAVED'.
2 To recall your favourite station, press the Favourite button.
To Next Page
Need help?
General
