EasyManua.ls Logo

Roberts solarDAB 2 - Manual Tuning - DAB; Tuning to Specific Channels; Signal Strength Display - DAB; Checking Signal Quality

Roberts solarDAB 2
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
1
1
2-5
Manual tuning - DAB
Manual tuning allows you to tune directly to the various DAB Band III channels.
UK DAB stations located in the range 11B to 12D.
1. Press and hold the Info button until the Advanced DAB menu shows on the
display and then release the button.
2. Rotate the Tuning control until the display shows 'Manual tune'. Press and
release the Tuning control.
3. Rotate the Tuning control to select the required DAB channel.
4. Press and release the Tuning control. The clear un lled rectangle indicates
minimum signal level required for satisfactory reception. When a DAB signal
is found, the display will show the name of the DAB multiplex. Any new radio
stations found will be added to the list stored in the radio. The Signal blocks
will go up and down showing the changing signal strength as you adjust the
telescopic aerial or the radio position.
5. Press and release the Tuning control to return to normal tuning after a few
seconds.
Signal strength display - DAB
1. Repeatedly press and release the Info button until the lower line of the
display shows signal strength.
2. Position your radio and try moving the aerial so as to give maximum number
of black rectangles on signal strength display. Normally, the best reception
will be found with the aerial vertical and fully extended.
3. The clear un lled rectangle indicates minimum signal level required for
satisfactory reception.
Manual tune
DAB
12B 225.648MHz
Manual tune
BBC National DAB
BBC R1
Now tuning...
DAB
BBC R4 DAB

Other manuals for Roberts solarDAB 2

Related product manuals