2
8
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on your radio. The display will show
'Welcome to DAB'.
3. If this is the fi rst time the radio is used a scan of the Band III DAB
channels will be carried out. If the radio has been used before the last
used station will be selected.
4. During the scanning process, the lower line of the display shows a
bar-graph indicating progress of the scan.
5. When the scanning is completed the fi rst station (in numeric-alpha
order 0...9...A....Z) will be selected.
6. If the station list is still empty after the scan your radio will display 'No
DAB station'.
7. If no signals are found it may be necessary to relocate your radio to
a position giving better reception. Then, either switch your radio off
and on again, or press the Auto Tune button to repeat the scan.
Note: Radio station name and frequency displays shown in this user guide
may differ from those that you see on your radio. Broadcasters may change
radio station names that are transmitted, and the frequencies used for
DAB and FM radio stations may not be the same in all parts of the country.
AbsR60s
Now tuning...
DAB
Welcome to DAB
To Next Page
Loading...
