Roberts Stream 94L - Clock Settings and Updates

41
Clock and Alarms
Automatically updating the clock
Your radio will normally update the clock automatically when connected to the internet.
Alternatively you may specify that the time is not automatically updated. In this case
the clock must always be set manually after a power interruption.
1. With your radio switched on, press Menu.
2. Choose 'System Settings', 'Time/Date', 'Auto Update' and then choose an
update option from 'Update from Radio', 'Update from Network' or 'No update'
as required.
Setting the clock format
The clock display used in Standby mode and on the playing mode screens can be
set to 12 or 24 hour format. The selected format is then also used when setting
the alarms.
1. With your radio switched on, press Menu.
2. Choose 'System Settings', 'Time/Date', Set Format' and then select either 12
or 24 hour. The current clock display format is marked with an asterisk.
If the 12 hour clock format is chosen, the radio will then use the 12 hour clock
for the setting of alarms, and will display a 12 hour clock with an AM or PM
indicator when in standby mode.
Set Time/Date
Auto Update
Set Format
Set Timezone
Daylight Savings
Clock Style
Time/Date
Auto Update
Update from DAB
Update from FM
Update from Network
No update
*
Date/Time
12/24 hour format
Equaliser
Streaming Audio Quality
Network
Time/Date
Brightness
Inactive Standby
System Settings
Set Time/Date
Auto Update
Set Format
Set Timezone
Daylight Savings
Clock Style
Time/Date
DAB
60