If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
26
System Reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete, carry out the following procedure.
1. Whilst in DAB mode press and hold the Menu button and then
repeatedly press the Tuning Up or Down buttons until the display
shows 'SELECT Factory'.
2. Press and release the Select button, 'Confi rm Reset' will be displayed.
Press the Select button again to confi rm reset.
A full reset will be performed and the station list together with any preset
stations will be erased.
In case of malfunction for any reason, just reset the product to resume
normal operation. It may be necessary in some cases to disconnect the
mains power and remove batteries, then reconnect after 10 seconds.
In case of malfunction due to electrical fast transient (Burst), just reset the
product (reconnect of power source may be required) to resume normal
operation.
1
1
1
2
To Next Page
Loading...
