What to do if my Robertshaw RS4110 shows HI or LO but the room temperature is normal?
If your Robertshaw Thermostat displays HI or LO while the room temperature is normal, it is recommended to call a licensed service person to replace the thermostat.
Why does my Robertshaw RS4110 Thermostat system turn on too often?
If your Robertshaw Thermostat system turns on too often, increase the temperature differential. Refer to the Pop-Up Wizard section for guidance.
How to fix Robertshaw RS4110 Thermostat not displaying proper room temperature?
If your Robertshaw Thermostat is not displaying the correct room temperature, check the F/C (Fahrenheit/Celsius) setting. Please refer to the Pop-Up Wizard section for instructions.
How to fix a Robertshaw RS4110 Thermostat that does not turn on the system?
If your Robertshaw Thermostat does not turn on the system, check the wiring. Refer to the Wiring Diagrams section for guidance.
What to do if Robertshaw Thermostat displays HI or LO with normal room temperature?
If your Robertshaw Thermostat display shows HI or LO while the room temperature is normal, it's recommended to call a licensed service person for replacement or repair.
What to do if my Robertshaw Thermostat display shows HI or LO?
If your Robertshaw Thermostat displays 'HI' or 'LO' while the room temperature is normal, it indicates an issue that requires professional attention. It is recommended to call a licensed service person for replacement or repair.
What to do if Robertshaw Thermostat system fan does not operate properly?
If the system fan on your Robertshaw Thermostat isn't working correctly, move the fan option switch to either gas or electric to match your system. See the System Switch Selection section for more details.
Why does my Robertshaw RS4110 Thermostat turn on too often?
If your Robertshaw Thermostat is turning on too often, try increasing the temperature differential. This adjustment can be made within the settings.
Switches to manual mode, displaying only the setpoint temperature for continuous operation.
Sets a temporary setpoint for a specified number of hours, after which the schedule resumes.
Sets a setpoint for a specified number of days, used for extended absences.
General| Type | Programmable |
|---|---|
| Stages | 1 Heat/1 Cool |
| Voltage | 24V AC |
| Backlight | Yes |
| Temperature Range | 45°F to 90°F |
| Display | LCD |
| Features | filter change reminder |
| Mounting | Wall Mount |
To Next Page
