SC-888 Instructions
Thank you for buying the Robic SC-888. Your purchase brings you a world class timer with a vast array
of advanced timekeeping functions.
Please take a moment to review this operating guide, so that you can become familiar with the SC-888’s
many capabilities and how you can best access them for your maximum benefit.
The SC-888 can be configured to operate as a Single (T-1), Double (T-2) or Triple (T-3) timer within the
Chronograph (stopwatch), Speed and Countdown timer modes. Single, Double or Triple refers to the SC-
888’s ability to time one, two or three activities or competitors at once.
Certain pushbuttons perform different operations, depending on how the timer is configured. The other
pushbuttons operate the same in all (ALL) modes. Single: T-1; Double: T-2; Triple: T-3.
The following illustration provides the operation of pushbuttons and location of indicators for the Robic
SC-888.
(B)
(T-1) Lap/Split •Reset
(T-2)/(T-3): Start – Lap/Split –
Stop #2
ALL: Reset to zeros
(D)
ALL: Backlight
(F) ALL: Recall, Set
Mem
ory Up or Down
(E)
ALL: Change Mode (Mode/Select)
Release to Running Time
(C) ALL: Advance
(T
-3): Start •Lap/Split •Stop #3
(A) (T-1) Start Stop
(T-2)/(T-3) Start •Lap
/Split
Indicators: Above the top row:
Recall Maximum/ Slowest Memory Speed
Direction Average Fastest Lap
Lap Recall Timer Chrono Mile Kilometer
⇑ ⇓ AVG MAX SLOW RCL SPEED CHR MILE KM
To Next Page
Need help?
General
