Page 1 of 8
Rev 02 01/11/13
SC-606W Instructions
Thank you for buying the Robic SC-606W. Your purchase brings you a world class timer with a vast array
of advanced timekeeping functions.
Please take a few moments to review this operating guide, so that you may become familiar with the SC-
606W’s many capabilities and how you can best access them for your maximum benefit.
PART I
PUSHBUTTON and INDICATOR LOCATION
The following illustration details the location of pushbuttons and indicators for setting and operating the
SC-606W.
The indicators in this illustration will appear only when a particular mode or function is activated by
pressing a pushbutton.
Once you are familiar with the SC-606W’s operation, you will be ready to enjoy its many functions. The
starting point for any operation is the NORMAL TIME mode. You may sequence through the modes by
pressing “C”.
NORMAL TIME
Time of Day in Hours, Minutes and Seconds
Calendar with Day, Month and Date
AM/PM or 24 Hour Time Options
Daily Alarm and Hourly Chime
CHRONOGRAPH (Stopwatch)
Three (3) Timing Options
(1) Lap Time Chronograph
(2) Split (accumulated) Time Chronograph, or
(3) Dual Lap/Split Time Chronograph
Each option offers these functions:
1/100 Second Resolution to 24 Hours
Pushbutton “A”
START/STOP
Alarm/Chime On/Off
Indicators:
UP, DOWN, AVG, MAX, SET
Indicators:
CHRONO, LAP/SPL, RUN, STOP, RCL, , ((()))
Pushbutton “C”
ADVANCE/RELEASE
MODE/NEXT
Pushbutton “D”
AVG/MAXIMUM
MEMORY RECALL/SET
Pushbutton “B”
LAP SPLIT/RESET
Alarm Time Display
To Next Page
Need help?
General
