Page 4 of 8
Rev 02 01/11/13
The appropriate indicator “LAP”, “SPL” or “LAP/SPL” will appear.
MEMORY RECALL DIRECTION
Select between ascending (up) and descending (down) memory recall by pressing “B” while Chrono is in
the RESET (all zeros) position. The recall direction can only be selected while the Chrono is in the reset
(all zeros) position. You cannot select between “UP” and “DN” while the time is running, or not reset.
50 MEMORY RECALL Operation
You may access up to the previous 50 readings while the Chronograph is running or stopped by pressing
“D”. The recall operation will ascend or descend, depending upon the option selected.
Average Lap Time, Maximum (fastest) Lap Time
The Average and Fastest Lap Times will first be displayed at any time by pressing “D”. “AVG” indicator
will appear for Average Lap Time, and “MAX” indicator will appear for the Fastest Lap Time.
Simply press “F” at any time to review previous readings. Recall (“RCL”) indicator appears. Holding “F”
down, will scroll through the memory recall function.
If “RUN” indicator appears, you may take a reading by pressing “B” or stop the chrono by pressing “A” at
any time while using the memory. You may also return to the last previous reading at any time, by
pressing “D”.
LAP CHRONOGRAPH Operation
In the Chrono mode, Press “D” until “LAP” indicator appears.
Single Events: Press “A” once to start. Press “A” again to stop. Press “B” to reset to all zeros.
Timing Multiple Laps: Press “A” to start. “RUN” indicator appears, Lap Time appears running in the
lower row. Press “B” to take a Lap Time. The previous Lap Time will appear in the upper row of the
display and the current Lap Time will build up from zero in the bottom row. The SC-606W will take up to
999 lap times. The LAP COUNTER will increase by one (1) each time “B” is pressed to take a Lap Time.
Press “A” to stop. “STOP” indicator appears. LAP COUNTER will increase by one (1) when timer is
stopped. Then press “B” to reset to all zeros.
For MEMORY RECALL and AVG/MAX operations, please proceed as described above.
SPLIT CHRONOGRAPH Operation
In the Chrono Mode, press “D” until Split “SPL” indicator appears.
Single Events: Press “A” to start. Press “A” again to stop. Press “B” to reset to all zeros.
Timing Multiple Splits: Press “A” to start. “RUN” indicator appears and time is shown running in the
lower row of the display. Press “B” to take a Split time. The Split time appears in the upper row of the
display, while the accumulated running time appears in the lower row. The LAP COUNTER will increase
by one (1) each time “B” is pressed. The SC-606W will take up to 999 Split times.
Press “A” to stop. “STOP” indicator appears. LAP COUNTER will increase by one (1) when the timer is
stopped. Press “B” once, to view the total accumulated time of the event. Then, press “B” again to reset
your SC-606W Chronograph to all zeros.
To Next Page
Loading...
