Need help?Do you have a question about the Robin DR400/120D and is the answer not in the manual?
Details the engine manufacturer, models, displacement, cooling, and FADEC system.
Outlines procedures for engine failure during takeoff roll, after takeoff, and during flight.
Provides steps for preparing and executing a landing with no engine power.
Details the steps to attempt an engine restart after an in-flight failure.
Describes actions to take when FADEC malfunctions are detected during flight.
Lists procedures for safely shutting down the engine during flight.
Covers procedures for engine fires on the ground and in flight, and electrical fires.
Addresses abnormal engine behavior such as low oil pressure or high temperatures.
Provides guidance on actions to take when inadvertently encountering icing conditions.
Details procedures for handling electrical power supply failures.
Outlines the procedure to recover from an inadvertent spin.
Refers to the original POH for procedures regarding loss of elevator control.
Provides a step-by-step guide for starting the aircraft engine.
Details procedures for normal, short, and crosswind takeoffs.
Details procedures for short landing and overshoot.
Provides takeoff distances based on pressure altitude, temperature, and weight.
To Next Page
General