Robin EH17-2D - Protective Covers and Adjustments Safety

PROTECTIVE COVER
• Place the protective covers over
the rotating parts.
If rotating parts such as the drive
shaft, pulley, belt, etc. are left ex¬
posed, they are potentially hazardous.
To prevent injury, equip them with
protective covers or shrouds.
• Be careful of hot parts.
The muffler and other engine parts
become very hot while the engine is
running or just after it has stopped.
Operate the engine in a safe area and
keep children away from the running
engine.
• Never make adjustments on the ma¬
chinery while it is connected to the
engine, without first removing the ignk
tion cable from the spark plug. .
Turning the crankshaft by hand during
adjusting or cleaning might start the
engine, and machinery with it, causing
seridus injury to the operator.
• Never run the engine with governor
disconnected, or operate at speeds in
excess of 3600 rpm load.
SURROUNDINGS
• Operate the engine on a stable, level
surface free of small rocks, loose
gravel, etc.
• Operate the engine on a level sur¬
face.
If the engine is tilted, fuel spillage may
result.
NOTE
Operating the engine at a steep incline
may cause seizure due to improper
lubrication even with a maximum oil
level.