Robin EH17-2D User Manual

6. EASY TROUBLESHOOTING
WHEN ENGINE WILL NOT
START:
• Perform the following checks before
you take the engine to your Robin
dealer.
• If you still have trouble after com¬
pleting the checks, take the engine to
your nearest Robin dealer.
Is there enough compression ?
1. Pull the starter handle slowly and
check if resistance is felt.
2. If little force is required to pull the
starter handle, check if the spajrk plug
is tightened firmly.
3. If the spark plug is loose, tighten it.
Is the spark plug wet with gaso¬
line?
1. Choke v (close choke lever) end pull
the starter handle five or six times.
Remove the plug and check if its
electrode is wet.
If the electrode is wet, fuel is well
supplied to your engine.
2 . When the electrode is dry, check
where the fuel stops. (Check the fuel
intake of the carburetor and fuel
strainer intake.)
3. In case the engine does not start with
well supplied fuel, try using fresh fuel.
- 12 -

Robin EH17-2D Specifications

General

Brand	Robin
Model	EH17-2D
Category	Engine
Language	English