Robin EH17-2D - Storage Preparations; Fuel Discharge and Oil Treatment; Cleaning and Storing the Engine

10. PREPARATIONS FOR STORAGE
DISCHARGE FUEL
(NO SMOKING !)
• Remove the strainer cup, place the
strainer over a container and open the
strainer cock to discharge fuel from
the fuel tank.
• Remove the carburetor float chamber
bolt from the bottom and discharge
fuel from the carburetor.
ENGINE OIL
• Change the engine oil with fresh oil.
• Remove the spark plug, pour about 5
cc of engine oil into the cylinder,
slowly pull the starter handle of the
recoil starter 2 or 3 times, and re¬
install the spark plug.
CLEAN AND STORE
• Slowly pull the recoil starter handle
until resistance is felt and leave it in
that position.
• Clean the engine thoroughly with an
oiled cloth, put the cover on, and store
the engine indoors in a well-
ventilated, low humidity area.
- 20 -