Robin EH17-2D User Manual

CLEANING FUEL
STRAINER (NO SMOKING!)
• Inspect fuel strainer for water and dirt.
• To remove water and dirt, close the
fuel cock and remove the strainer cup.
• After removing dirt and water, wash
the strainer cup with gasoline.
Reinstall securely to prevent leakage.
CLEANING AIR CLEANER
Dirty air cleaner element will cause
starting difficulty, power loss, engine
malfunctions, and shorten engine life
extremely.
Keep the air cleaner element clean.
. -ar
• Urethane Foam Element
Remove the element and wash it in
kerosene or diesel fuel. Then saturate
it in a mixture of 3 parts kerosene or
diesel fuel and 1 part engine oil.
Squeeze the element to remove the
mixture and install it in the air cleaner.
• Urethane Foam Dual Structure
1. Clean the urethane foam in the same
way as described above.
2. Wash the element in kerosene or
diesel fuel.
Saturate it in a mixture of 3 parts
kerosene or diesel fuel and 1 part
engine oil. Shake off excessive oil
and reinstall.
• If an oil bath or special air cleaner
with precleaner is used, clean the oil
pan, fill oil to the required level or
clean the dust pan.
- 18 -

Robin EH17-2D Specifications

General

Brand	Robin
Model	EH17-2D
Category	Engine
Language	English