Robin EY27-2 User Manual

5-5-2 FLEXIBLE COUPLING
When
a flexible coupling is used, the runout and mis-alignment between the driven shaft and the
engine driving shaft must be made as small as possible.
The tolerances on the runout and mis-alignment are specified by each coupling maker.
5-6 WIRING
5-6-1 START by RECOIL STARTER, or by ROPE
The wiring is indicated in the wiring diagram given below. Normally, the portions indicated by
dotted line are not wired in the engine at the factory.
1) Point system
MODEL EY14
MODEL EY18-3
~ Stoo Button
Lighting
Switch Lamp (6V-8V
\ 'Ignition Coil
Lighting
Coil (Optional Equipment, available
Spark Plug
Contact Breaker
la" "-7
',15W)
if required)
' Lighting Coil (Optional Equipment, available if
MODEL EY25-2, EY27-2 ,Condenser
required)
ir .ed )
Fig. 5-6- 7
- 15 -

Robin EY27-2 Specifications

General

Brand	Robin
Model	EY27-2
Category	Engine
Language	English