Robin SPIIDER - 3. Fixture Exterior View

5
3. Fixture exterior view
The head should be locked for transportation - the tilt lock latch (7) has to be in the locked position. To unlock
the head, move this latch to unlock position before operating the xture.
The ENTER/DISPLAY ON button also serves for switching the display on when the xture is disconnected
from the mains.
1 - Lens array
2 - Yoke
3 - Handle
4 - QVGA touch screen
5 - Control buttons
6 - USB port
7 - Tilt lock
8 - 3-pin DMX OUT
9 - Ethernet IN
10 - Base
11 - Ethernet OUT
12- 3-pin DMX IN
13- 5-pin DMX IN
14- Mains IN
15- Fuse holder
16- 5-pin DMX OUT
17- Moving head