Robitronic Expert LD100

Need help?

Do you have a question about the Robitronic Expert LD100 and is the answer not in the manual?

Summary

Features

High-Power Circuitry

Features 60W/100W output for charging up to 8 NiCd/NiMH cells or 4 Li-ion series.

Integrated Lithium Balancer

Comprehensive Safety Features

Includes Delta-peak, capacity, temperature, and time limits for safe charging and discharging.

Warnings and Safety Notes

General Safety Precautions

Covers unsupervised charging, environmental factors, surface placement, and connection safety.

Battery Chemistry Specific Safety

Details voltage levels, charge currents, and cut-off points for various battery chemistries.

Lithium Battery Handling Guidelines

Emphasizes verifying capacity/voltage and avoiding deep discharge for Lithium batteries.

Initial Parameter Set Up

Setting Essential User Parameters

Lithium Battery Operation

Lithium Battery Program Guidance

Stresses correct battery type selection and setting charge current/voltage for safe operation.

6.1 Charging Lithium Battery

Sets charge current and voltage for Lithium batteries. Initiates process after confirmation.

6.2 Balance Charging Lithium Battery

Balances cell voltages during charging by monitoring and controlling current to each cell.

6.5 Discharging Lithium Battery

Sets discharge current and final voltage, preventing deep discharge and ensuring safety.

6.6 Cell Voltage Balancing During Discharge

NiMH;NiCd Battery Operation

7.1 Charging NiCd;NiMH Battery

7.2 Discharging NiCd;NiMH Battery

Pb Battery Operation

8.1 Charging Pb Battery

8.2 Discharging Pb Battery

Battery Internal Resistance Testing

Warning and Error Messages

Common Error Message Categories

Details common errors such as polarity, connection, short circuits, voltage selection, and malfunctions.

Specific Error Indicators

Covers specific cell voltage, temperature, control, and connection errors for diagnosis.

Technical Specifications