Robitronic Expert LD 80

Need help?

Do you have a question about the Robitronic Expert LD 80 and is the answer not in the manual?

Summary

Product Features

Optimized Operating Software

Provides automatic current setting for charging/discharging, enhancing safety and preventing overcharging.

High-Power Circuit

Features an 80W output circuit capable of charging/discharging up to 15 NiMH/NiCd cells or 6 Li-ion series.

Internal Lithium Cell Balancer

Cell Balancing During Operation

Monitors and balances individual Lithium battery cells during charge/discharge, stopping on abnormal voltage variations.

Advanced Safety Features

Incorporates Delta-peak sensitivity, current limits, capacity limits, temperature limits, time limits, and input power monitoring for safety.

Warnings and Safety Notes

General Usage Precautions

Never leave charger unsupervised, keep away from dust/damp, use on heat-resistant surface, avoid flammable materials.

Battery Type Specifications

Provides voltage levels, max charge voltage, and allowable fast charge current for NiMH/NiCd, Lilo, LiPo, LiHv, Life, and Pb batteries.

Charge;Discharge Safety Guidelines

Avoid short-circuits, do not disassemble packs, set final discharge voltage correctly, avoid deep discharge for Lithium.

Program Flow Chart

Program Navigation Flow

Initial User Parameter Setup

Setting Nominal Voltage (V.Type)

Crucial step to select correct battery type (LiFe, Lilo, LiPo, LiHv) and nominal voltage for safe charging.

Lithium Cell Count Recognition

Safety Temperature Cut-Off

Safety Timer

Lithium Battery Programs

6.1 Charging Lithium Battery

Details the process of setting charge current and battery pack voltage for standard Lithium battery charging.

Selecting Lithium Battery Type and Voltage

Crucial step to select correct battery type (LiFe, Lilo, LiPo, LiHv) and nominal voltage for safe charging.

Setting Charge Current and Pack Voltage

6.2 Lithium Battery Balance Charging

Focuses on balancing Lithium battery cell voltages during charging via the balance port for optimal performance.

Cell Count Confirmation

6.3 Fast Charging Lithium Battery

6.5 Discharging Lithium Battery

6.6 Cell Balancing During Discharge

NiMH;NiCd Battery Programs

7.1 Charging NiMH;NiCd Battery

7.2 Discharging NiMH;NiCd Battery

Pb Battery Program

8.1 Charging Pb Battery

Internal Resistance Testing

Warnings and Error Messages

Technical Specifications