Robitronic Expert LD 80 - 11 Load Data Program; 12 Various Information During the Process

10
4
safety temp
START
ENTER
‘> 3 seconds’
START
ENTER
-
40
-
It comes to the final voltage when the program
ended.
Displayed capacity cut-off function is turn on and
the setting value of capacity.
Displayed safety timer is turn on and duration of
time in minutes.
Displayed temperature cut-off function is turn on.
12. Various information during the process
You can inquire various information on LCD screen during charging or discharg-
ing mprocess. When you press DEC button the charger shows the establishment
of user settings. And also you can monitor the voltage of individual cell by
pressing INC button when the individual connection cable is linked to the Lithium
battery being processed.
Program select
Select the data number to be called back.
The data matched with the number will be displayed
at this time.
Loading the data.
11. Load data program
This program calls back the data that was stored at 'Save Data' program.To load
the data, press START/ENTER key once to blink the data number field and select
the number using INC or DEC key then press START/ENTER key for more than
3 seconds.