EasyManua.ls Logo

ROBLIN Virtuose - Operational Safety Features

ROBLIN Virtuose
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Function
Pause + Restart
This function freezes all the hob settings for approximately 10 minutes if the person
using the hob needs to go away for a short time.
During the pause:
- No energy is being used in any of the cooking areas.
- All the Timers are stopped.
- The“Turbo” and “Quick Heating” functions are deactivated
When the 10 minutes are up, the hob will continue with all the actions that were set
previously.
Activation: press the button for at least 1 second, all Digits indicate
Deactivation: press the key for at least 1 second until it flashes, within 10
seconds press any other key.
Recall Function
This function is used to recall all the hob function settings in the event of involuntary
shut-down or a sudden power cut.
With the hob off, if within 6 seconds the hob is turned off again using the button
, the button flashes for 6 seconds. Press the button to recover the
functions set previously. A beep sounds to confirm the operation.
With the hob turned off, if it is turned on again within 6 seconds the previous
function settings are recovered automatically.
Bridge Function
This function allows 2 cooking areas to be connected, so that they can be
controlled as a single, large cooking area. This means it is possible to use pans
with a larger bottom.
Attention: with the hob turned on, simultaneously press the required buttons to
select the 2 areas to form a bridge, until a Digit displays to indicate that the
function has been activated.
The other Digit is used to set the power level.
Caution: The left cooking areas cannot be connected to the right ones, and vice
versa.
Deactivation: press simultaneously the keys on which the bridge is created until
the symbol disappears.
Automatic pan
detection function
If a pan is placed on one of the cooking areas, the hob detects it automatically
and lights up the corresponding Digit at maximum intensity, displaying .
Residual heat indi-
cator
The residual heat indicator is a safety feature, indicating that the surface of the
cooking area is still at a temperature of 60°C or above, which may cause burns if
touched by a naked hand.
The Digit for the corresponding cooking area displays .
41

Table of Contents

Related product manuals