E5
No communication
between UI and induction
generator.
The cooking area cannot
be activated
LIN cable or power cable faulty.
Check the cables and the
power supply voltage.
Plate cables wrongly connected.
Check the cables and the
power supply voltage.
Internal error in generator or
filter circuits.
Replace the module.
E6
The power supply voltage
does not fall within the
range (voltage and/or
frequency). The cooking
area cannot be activated
The power supply voltage does
not fall within the range (see
technical data for details).
Check the mains voltage.
Internal error in generator
circuits.
Replace the module.
E7
TC internal error. The
cooking areas are
deactivated.
- Replace the module.
E8
Suction hood malfunction.
The suction hood is blocked. Clean and remove any blocks.
Faulty fan or electronic module. Replace the module.
E9
Cooking area temperature
sensor error. The
corresponding cooking
area is Off.
The temperature sensor circuit
is open or there is a short-
circuit.
Replace the inductor.
EA
TC internal error. The
cooking areas are Off.
- Replace the generator.
EH
Temperature sensor
blocked. The corresponding
cooking area is Off.
No temperature change (min.
10 K/5 min) after activation of
the cooking area.
Replace the inductor.
TC = TOUCH CONTROL
UI = USER INTERFACE
NTC = TEMPERATURE SENSOR
51
To Next Page
Loading...
