Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller Back to Top User Manual v4.05 – Page 8
o Create rules using up to 5 optical sensors, switches or any analog/digital Arduino sensor
o Create rules using the 4 flow meters
o Set level for parameter to activate rule
o Turn any outlet on or off using any sensor or parameter
o Turn any water pump or DC accessory on or off using any sensor or parameter
o Dose your aquarium using any sensor or parameter
o Backup timer so dosing pump doesn't activate more than once in set time frame
o Options to skip rule If AC outlet schedule Is on or off
Automatic Top Off (ATO) System (sensors required)
o Flood proof
o Float switch to monitor water levels
o Backup float switch
o Select maximum time ATO pump can run in case float switches malfunction
o Check water level every 1-24 hours
o Float switch must sense low water level for 30 minutes before ATO pump is activated
o Test mode to bypass delays
o Receive email alerts when ATO pump starts and stops
o Receive email alert if ATO System malfunctions
o ATO Requires resetting if ATO malfunctions
Other Features
o Adjustable display brightness
o Auto-dim feature adjusts the screen brightness based on ambient light conditions
o Independent temperature control for 3 water heaters
o Header status icons for ATO, webpage open, internet connection, screen lock and controller connection
o All settings stored in an eeprom so you never loss your settings
o Smart startup routine resumes controller on power outages base on schedules and custom rules
o Display all times in 24 hour or 12 hour format
o One touch to sync display and controller
o Assign equipment to ports
o Custom pin code to lock screen
o Custom home screen dock
o Multiple home screen docks
Internet Access
o Monitor all sensors and probes
o Feed fish
o Control AC power outlets
o Receive real-time email alerts
o Monitors external IP address for changes and emails new address when it changes, you'll always be able to
connect away from home
o Auto generate strong username and password for web access or customize to your liking
o View local and external IP address, username and password on display so you never forget your login
information
Email Alerts
o Email alerts can individually be turned on or off
o 26 different alerts (more coming soon)
o Receive emails if water or light temperature goes over or under a set value
o Receive emails if PH, ORP, Dissolved Oxygen, Saturation, Conductivity, TDS, Salinity or Specific Gravity goes
over or under a set value
o Receive email if controller restarts
o Receive email if external IP address changes
To Next Page
Loading...