Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller Back to Top User Manual v4.05 ā Page 30
Scheduling the Feeding Cycle
From the Home screen press: Settings > Schedules >
Feeding, and you get the FEEDING SCHEDULE
screen, on the left. Here you can set when the feed
cycle starts. You can set 2 feed schedules per day.
The check boxes are on 2 lines, 1 and 2, those are the
two feeds per day. If the box is checked the fish will
be feed that day at the set time for each feed.
Manual Feeding
If you have the auto feeder enabled you don't need
to do anything, however if you feel like giving your
fish an extra feeding you can press the Fish Bowl on
the Home screen or shortcut on dock and you will
see the FEEDING screen on the left.
If you press Auto Feed the feed cycle will run and
your automatic fish feeder will run. If you press Hand
Feed, the feed cycle will run but your auto fish
feeder won't. This could be useful if you want only
the AC outlets to go to the feeding schedule. You can
also stop the feed cycle at any time.
To Next Page
Loading...