Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller Back to Top User Manual v4.05 – Page 36
Customizing the Controller
You can customize many of the important aspects of the controller, choose the water parameters to view on the home screen,
view temperatures in Celsius or Fahrenheit, view times in 12hr or 24hr format, adjust the date and time, change the LED
sliders to match the colors of your LED’s for each channel, customize the icons for each of the 16 AC power outlets and
customize home page docks with shortcuts.
Using the Customize Controller Sub-Menus
From the Home screen press: Settings > Customize,
and you get the sub-menu on the left, CUSTOMIZE
CONTROLLER. From here you can customize the
controller to your liking.
Customizing the Home Screen
Press Home Page, and you get the CUSTOMIZE
HOME PAGE screen, this is where you customize the
parameters you want displayed on the Home screen.
On the left side of the screen, you select (check)
which water parameters you want to display & have
scroll on the Home screen, (up to 10 separate
parameters).
On the right side of the screen, under Home Screen
Box 1, you can select (check), whether you want to
display either Last Fish Feed or the Flow Meters.
Next under Home Screen Box 2, you can select
(check), whether to display either Light Mode status, or the Local Weather.
On the Home screen, if you touch the area that displays either Last Fish Feed/Flow Meters or Light Mode/Local Weather, it
will take you directly to the relevant screens.
To Next Page
Loading...