Robo-Tank DIY All-In-One Aquarium Controller User Manual
Robo-Tank DIY All-In-One Aquarium Controller Back to Top User Manual v4.05 – Page 6
o 10 schedules available for each outlet, can be set for specific days of the week.
o Turn AC outlet on with schedule and off with custom rule or vice versa
o Turn AC outlets on or off using custom rules
o Control AC outlets from the internet (phone or computer)
Monitor 4 Flow Meters
o View data in liters or gallons
o View flow per minute
o View flow per hour
o View total volume
o Use flow meters in custom rules to control equipment
Monitor Temperature and Humidity from 7 Sensors
o 2 ports - DS18B20 temperature sensors (referred to as water and light temperature)
o 1 port - DHT22 Air temperature / humidity sensor (referred to as air temperature)
o 4 ports - optional DS18B20 or DHT22 sensors
o Customize names for all 7 sensors
o View temperatures in Celsius or Fahrenheit
o View all Parameters in a central location
o View minimum and maximum temperature readings
o Turn heater on/off when temperature rises or falls
o Optional low and high-level audible/visual alarm for each parameter all set within UI
o Optional low and high-level email alerts for each parameter all set within UI
o All parameters can be used with custom rules to control equipment
o Full data logging and graphs for all sensors
o View sensor data from the internet (phone or computer)
Works with PH, ORP, Dissolved Oxygen and Conductivity EZO Atlas-Scientific Circuits (2 pH circuits can be
connected)
o Calculate CO
2
using pH and KH value (KH value is manually set in UI)
o Optional low and high-level audible/visual alarm for each parameter all set within UI
o Optional low and high-level email alerts for each parameter
o Home screen scrolls through any of the 8 parameters or view only one (scroll time adjustable and touch to
view next parameter)
o Connect 2 pH circuits to use 2 pH probes
o All parameters can be used with custom rules to control equipment
o View all parameters in a central location
o View up to 9 different parameters (pH, pH, ORP, Dissolved Oxygen, Saturation, Electrical Conductivity, Total
Dissolved Solids, Salinity and Specific Gravity)
o Full data logging and graphs for all 9 parameters
o View sensor data from the internet (phone or computer)
o Step by step full easy calibration for all circuits, 1, 2 or 3 point depending on circuit
Automatic Fish Feeding
o Control auto fish feeder using 2 daily schedules or manually
o Select AC outlet status during feeding
o Set length of feeding
o Enable/disable auto fish feeder
o Run Auto Feeder from internet (phone or computer)
248 Different Schedules
o Schedule 6 different transitions for the LED's
o Schedule 16 AC outlets up to 10 times per day, each schedule can run for selected days of the week
o Schedule 8 dosing pumps up to 10 times per day, dose daily or select days of week to dose
To Next Page
Loading...