2.2 Shutting down
To end the operation, press ON/OFF button, the lightbox and the heater
are turned off. After turning off, ventilation operates for 5 minutes more,
and then automatically is turned off.
2.3 Adding oil
If "OIL" message appears on the display, it means that the machine has
detected low oil level. Do the following:
1. Turn the machine off.
2. Close loading tray
3. Open the door
4. Carefully pour oil into the frying pan up to the MAX mark.
5. Close the door
6. Turn the machine on.
2.4 Changing oil
The same load of oil can be used for certain time, which depends on the
product used, settings, and other factors. It is recommended to use special
tool or testing strips to find out when oil should be changed. To change
the oil, daily cleaning procedures must be performed, see Technical Main-
tenance section.
10
To Next Page
Loading...