5. Press ON/OFF button to save the new value.
6. To set another timer, repeat steps 3 to 5.
7. The machine automatically returns back to standby mode after 10
sec of idle.
3 Cleaning and maintenance
ALWAYS unplug before cleaning!
DO NOT use excessive water for cleaning!
DO NOT use aggressive solutions for cleaning!
DO NOT use sharp tools or items for cleaning!
Wait until oil is cooled down!
The purpose of cleaning and maintenance is to keep the machine operable
during the entire service life and to meet hygiene requirements.
3.1 Cleaning instructions
In the end of a day do the following:
1. Let the oil to cool down.
2. Attach oil drain hose to the valve, get ready a drainage container,
and put free end of the hose into container.
12
To Next Page
Loading...