EasyManuals Logo

Robomow RC304u Operation And Safety Manual

Robomow RC304u
57 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
EN
There are two options to set the Base Station:
3.2.2 Internal Setup (on the lawn perimeter)
• Choose a place along the Perimeter Wire where
you want to place the Base Station, based on the
onditions detailed in paragraph 3.2.1.
• Place the Base Station in the direction shown in the
guretotheright.
3.2.3 External Setup (off the lawn perimeter):
Scan the code to watch the
video on how to install an
external base.
There are two types of External Setup:
A.
At a corner
In this type of setup, the Base Station is located at one
of the cornersofthelawn,asshowninthegureatthe
right.
• Choose a corner where you want to place the Base
Station outside of the lawn area.
• Place the Base Station, where its front side is touching
the lawn edge or placed somewhere on the lawn.
• Continue to lay the perimeter wire as shown in the
gureontheright,whereitcontinuesatleast10cm
(4”) beyond the Base Station and turns back towards
the lawn at a distance of 10cm (4”) from the other
wire.
• The Base Station may be placed in a small shift to the
right, in order to allow smooth entry of the mower to
the Base Station.
• Later you will have the opportunity to adjust the Base
Stationpositiontoconrmsmoothentry.
B.
Outside the lawn
• Choose a place outside the lawn where you want Robomow to dock and charge.
• Conrmthepathbetweenthelawnandtheoutside
area is smooth with no height difference, so
Robomow will not get stuck and will follow the wire
smoothly.
• The surface between the lawn and the Base Station
should be hard (such as a sidewalk or rigid ground)
and not sandy or stony, so Robomow will not slip or
get stuck on it.
• The area between the lawn and the Base Station
should be clear of obstacles and objects.
• Laythewireasshownintheguretotheright:
- Narrow path of 50cm (20”) width.
- Square Perimeter Island of 30cm (12”) edges.
- Island starts 50cm from the Perimeter Wire.
- Keep a distance of 10cm (4”) between Perimeter
Wire and the Island from both sides.
- The front of the Base Station should be placed a minimum distance of 1.8m (6 ft.) from the Perimeter Wire and
NOT more than 4m (13 ft.).
Min. 10cm (4”)
10cm (4”)
10cm (4”)
Main Zone
5-4cm
Min. 10cm (4”)
10cm (4”)
Perimeter Island
30cm
50cm (20”)
Min 1.8m (6ft)
Max 4m (13ft)
5-4cm
50cm (20”)

Table of Contents

Other manuals for Robomow RC304u

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Robomow RC304u and is the answer not in the manual?

Robomow RC304u Specifications

General IconGeneral
TypeRobotic lawn mower
Noise level69 dB
Cutting width280 mm
Grass catcher-
Product colorGreen
Cutting systemRotary blades
Number of wheels3 wheel(s)
Maximum working climb36 %
Recommended lawn area500 m²
Maximum cutting height60 mm
Minimum cutting height15 mm
Grass collecting volume- L
Cutting clearance adjustment6
Battery typeBuilt-in
Power sourceBattery
Charging time0.83 h
Battery voltage26 V
Battery capacity2.4 Ah
Battery life (max)50 min
Battery technologyLithium
Power consumption per month (max)11 kWh
Weight and Dimensions IconWeight and Dimensions
Depth460 mm
Width630 mm
Height210 mm
Weight11400 g

Related product manuals