EasyManuals Logo
Home>Robomow>Lawn Mower>RK2000

Robomow RK2000 User Manual

Robomow RK2000
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
30 31
Insert pegs every 2-3m/7-10ft and at corners. At this early stage,
set a minimal number of pegs. You will insert all necessary pegs
later.
Pull the wire tight while hammering the pegs to their nal depth in
the ground.
Take care not to damage irrigation pipes.
TIPS
Maintain Proper Distance
The Perimeter Wire is secured to the ground
by the pegs supplied with the product. Use the
RoboRuler to determine the distances you should
leave between the Perimeter Wire and the lawns
edge and obstacles.
~ 2m

Table of Contents

Other manuals for Robomow RK2000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Robomow RK2000 and is the answer not in the manual?

Robomow RK2000 Specifications

General IconGeneral
TypeRobotic lawn mower
Motor typeBrushless
Noise level60 dB
Cutting width210 mm
Product colorBlack, Red, Turquoise
Number of zones2
Number of wheels3 wheel(s)
Maximum lawn area2000 m²
Mulching function-
Multi-Zone capabilityYes
Maximum cutting height1000 mm
Minimum cutting height200 mm
Suitable for slope up to45 %
Battery typeBuilt-in battery
Power sourceBattery
Charging time2 h
Battery voltage18.15 V
Battery capacity4.9 Ah
Battery life (max)120 min
Battery life (min)100 min
Repairability index8

Related product manuals