Robomow RK2000 User Manual

78 79
Mower does not dock properly and sometimes misses Base
Station’s contacts
The entrance to the Base Station is not at. Fill some ground to
atten the lawn around the Base Station to allow smooth entrance.
Make sure the Perimeter Wire is straight before and after the
Base Station.
Poor quality of mowing
The blades may be dull. Turn o the mower and, remove the
disabling device and replace them if needed. Use heavy gloves
when inspecting blades.
Patchy and uneven mowing
Make sure the working window is big enough and Increase the
mowing time via the Mowing hours setting to compensate for
lawn’s complexity or fast growing season
Mower does not depart from base for a long time
Tap the mower icon with the information bubble while the
mower is in the Base Station. The non-depart reason code
will be displayed. Refer to our online Help Center for a detailed
description of non-depart codes.
Frequently asked
questions
8

Robomow RK2000 Specifications

General

Type	Robotic lawn mower
Motor type	Brushless
Noise level	60 dB
Cutting width	210 mm
Product color	Black, Red, Turquoise
Number of zones	2
Number of wheels	3 wheel(s)
Maximum lawn area	2000 m²
Mulching function	-
Multi-Zone capability	Yes
Maximum cutting height	1000 mm
Minimum cutting height	200 mm
Suitable for slope up to	45 %
Battery type	Built-in battery
Power source	Battery
Charging time	2 h
Battery voltage	18.15 V
Battery capacity	4.9 Ah
Battery life (max)	120 min
Battery life (min)	100 min
Repairability index	8