28 29
Lay the Wire
2
• Have your mower’s package nearby.
• Be sure to cut your grass with your old mower one last time
before you start wiring. In addition, the ground should be
moist. This will make inserting pegs easier and help ensure
that the mower doesn’t cut the wire.
WHAT
YOU’LL
NEED
• Hammer
• Combination pliers
Lay the perimeter wire (“virtual boundary”), which denes
the working area for the mower.
TIPS
Now you’re ready to install the Perimeter Wire. Let’s take it step by
step.
... A sunny day and a sunny mood
:
)
To Next Page
Loading...
Need help?
General
