Robomow RM510 - Temperatures & Configuration Info; Last Stop Causes

39
Temperatures
Press GO
Drive temp.
Press GO
Mow temp.
+24 C +75 F
Main board
+35 C +95 F
Left drive
+26 C +78 F
Right drive
+26 C +78 F
Temperatures
Press GO
Temperatures
Press GO
Temperatures
Press GO
Drive temp.
Press GO
Mow temp.
+24 C +75 F
Main board
+35 C +95 F
Left drive
+26 C +78 F
Right drive
+26 C +78 F
Figure 2.19
Temperatures menu
Figure 2.20
Configuration menu
Figure 2.21
Last stop causes menu
Configuration
Press GO
Main board
ESB5000E
Software
5.4v 21/10/07
Base
ESB5002C v1.27
Configuration
Press GO
Configuration
Press GO
Configuration
Press GO
Main board
ESB5000E
Software
5.4v 21/10/07
Base
ESB5002C v1.27
Last stop causes
Press GO
1) 11 [ 3]
10:35 25/05/08
2) 20 [ 2]
11:24 24/05/08
10) 7 [ 6]
10:58 19/04/08
Last stop causes
Press GO
Last stop causes
Press GO
Last stop causes
Press GO
1) 11 [ 3]
10:35 25/05/08
2) 20 [ 2]
11:24 24/05/08
10) 7 [ 6]
10:58 19/04/08
2.2.11 Temperatures
Displays the temperatures on the drive motors, mowing motor and on the Main Board.
2.3.2 Configuration
Displays the configuration of the Robomow: Main Board part number, software version and Base
Station Board part number (figure 2.20):
2.3.3 Last stop causes
Displays the last ten stop causes number and the date of the stop.