59
EC DECLARATION OF CONFORMITY*
)
(Noise Level)
F. Robotics Acquisition Ltd. hereby certifies that equipment described below
0.1. Type: 24 Volt Battery operated Automatic Lawn Mower
0.2.
Make (Trade name): ROBOMOW
0.2.1.
Model/Type: RM200 (with Perimeter Switch)
RM510 (with Base Station)
0.3.
Manufactured by: Name: F. Robotics Acquisitions Ltd.
Address: Hatzabar St., Industrial Zone P.O.Box 1412 Pardesiya, 42815 Israel
0.4. Person who keeps the technical documentation:
Name: Mr. Dedy Gur, QA director.
Address: Hatzabar St., Industrial Zone P.O.Box 1412 Pardesiya, 42815 Israel
0.5 Notified body: SGS UNITED KINGDOM LIMITED
Rossmore Business Park ELLESMERE PORT
CH65 3EN South Wirral Cheshire United Kingdom
SGS Reference: ELS111832/4/R/SW/07
0.6 Conformity assessment procedure (Test Specification):
To BS EN ISO 3744: 1995 and *ISO 11094: 1991.
With reference to Outdoor noise directive 2000/14/EC: Amended by directive 2005/88/EC and
the corrigenda table 1. Article 12: Test code of Annex III Part B Item 32.
0.7 Date:6
th
May 2008 0.8 Place: SGS UNITED KINGDOM LIMITED
Conforms to the requirements of Directive 2000/14/EC and to the requirements of the Directives
2005/88/EC and the corrigenda table 1. Article 12: Test code of Annex III Part B Item 32:
Machinery Directive
Low Voltage Directive
Directive on Electromagnetic Compatibility
Signature (Full name and position
**
): Shai Abramson – Senior VP R&D
Brief description of equipment: 24 Volt Battery operated Automatic Lawn Mower
1. Sound level
1.2. Measured sound power level:……………………...LwA =77.2 dB
1.3. Guaranteed sound power level:…………………….LwA =80 dB
2. Sound related parameter:
Cutting Width: 19.5 cm
*)
This
declaration must be made in the same language as the original instructions, and either typewritten or printed. A
translation in the language (s) of the user country must also be provided. These translations are subject to the same
conditions as the original instructions.
**)
e.g. a function empowering the signatory to sign on behalf of the manufacturer (if the manufacturer is a natural person,
this is the manufacturer or his legal representative, and in the case of a legal person or association having no legal
personality, it is the person authorized to represent/manage him by law or by his rules or articles of association).
***)
For combustion-engine driven equipment it should be the nominal engine speed at which noise measurements are recorded. For chain saws:
this should be the nominal engine speed under full load conditions at which noise measurements are recorded.
To Next Page
Loading...
