24 25
• The Perimeter Wire is secured to the ground by the pegs supplied
with the product.
• Pull the wire tight while
hammering the pegs to
their final depth in the
ground.
• Take care not to damage
irrigation pipes.
• Place the pegs every few tens of
centimeters.
• Add pegs where necessary to keep
the wire tight to the ground to
avoid damaging it by the mower.
C. Keep laying the wire
Lay the Perimeter Wire loosely along the perimeter as you walk along
the lawn’s edge.
Start unwinding the wire counter clockwise around the lawn
starting at the Base Station’s location.
~0.5m
To Next Page
Loading...
