Instructions for Use
Pause
When the robot is cleaning, press any button to pause it.
Press the
button to continue cleaning or the button to stop
cleaning and send it back to the Charging Dock.
Ŏ
0DQXDOO\GRFNLQJWKHURERWLQ3DXVHPRGHZLOOVWRSWKHFXUUHQWFOHDQLQJF\FOH
Ŏ
If continuing to clean after moving the robot, place it close to its original position before
starting.
Note:
,IWKHURERWFDQQRWࢉQGWKH&KDUJLQJ'RFNLWZLOOUHWXUQWRWKHPRVWUHFHQWVWDUWLQJ
location. Place the robot on the Charging Dock manually to recharge.
Note:
Charging
Auto mode: After cleaning, the robot will automatically return to
the Charging Dock.
0DQXDO,I3DXVHGSUHVVWKH
button to send the robot back to
the Charging Dock.
The Power Indicator of the robot breathes when the robot is
charging.
Cleaning method
Once started, the robot will clean in a Z pattern. Once all areas
KDYHEHHQFRYHUHGLWZLOOFOHDQDORQJWKHZDOOWRHࢆHFWLYHO\FRYHU
WKHHQWLUHࢊRRU,WZLOOWKHQDXWRPDWLFDOO\UHWXUQWRWKH&KDUJLQJ
Dock.
5HࢉOOLQJWKHZDWHUWDQNRUFOHDQLQJWKH
mop cloth
To add water or clean the mop cloth, press any button to stop the
robot and remove the mopping module. After adding water or
cleaning the mop cloth, reinstall the mopping module and press
the
button to continue.