EasyManua.ls Logo

Roborock F25 - Battery and Charging; International Symbols Explanation

Roborock F25
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
07
SAVE THESE INSTRUCTIONS
Household use only.
Battery and Charging
Please keep the power cord and docking station away from heat (such as heating plates).
The battery must be removed from the appliance before it is scrapped.
The appliance must be disconnected from the supply mains when removing the battery.
The battery is to be disposed of safely. Please do not discard waste batteries. Leave them to a professional recycling organization.
Do not wipe or clean the power cord or docking station charging contacts with a piece of wet cloth or wet hands.
Please make sure the cleaner is powered off in shipment and original packaging is advised.
If left unused for a long period, please store the cleaner in a cool and dry place afer having it fully charged and switched off, charge it at
least every three months to avoid the battery being over discharged.
Do not discard waste batteries. Leave them with a professional recycling organization.
International Symbols Explanation
– ON-OFF (push-push) symbol [symbol IEC 60417-5010 (2009-02)]
– ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]
Battery pack charging temperature
Battery pack using temperature
Battery pack storage temperature
Long Storage (3 months)
Long Storage (6 months)
4°C ~ 40°C (39 ~ 104°F)
4°C ~ 40°C (39 ~ 104°F)
-20°C ~ 45°C (-4 ~ 113 °F)
-20°C ~ 20°C (-4 ~ 68 °F)

Related product manuals