Roborock Q10 Series - Product Overview; Charging Dock; Installation

07
Product Overview
A
A1
Robot (Top View)
Press any button to pause a running robot during
cleaning or docking.
Note:
Secure the mop cloth flat in place.Note:
A3
Robot (Top Cover Removed)
A3-1—Top Cover
A3-2—Dustbin and Water Tank Combo
Unit
A3-3—Charging Contacts
A3-4—VibraRise Module
A3-5—Air Outlets
A3-6—Reset Button
A3-7—Bumper
A2-1—Cliff Sensors
A2-2— Omnidirectional Wheel
A2-3— Carpet Sensor
A2-4— Side Brush
A9-1—Dock Location Beacon
A9-2— Power Port
A9-3— Charging Contacts
A1-1—Vertical Bumper
A1-2— LiDAR Sensor
A1-3— Reactive Tech Obstacle Avoidance
Sensor
A1-4—Dock Locator
A4-1—Mop Cloth Attachment Slot
A4-2—Vibration Module
A4-3—VibraRise Mop Cloth Mount
A4-4—VibraRise Mop Cloth Mount Latches
A2
Robot (Bottom View)
• White: Battery level ≥ 15%
• Red: Battery level < 15%
• Breathing: Charging or starting up
• Flashing red quickly: Error
• Flashing blue slowly: Waiting for
WiFi connection
• Flashing blue quickly: Connecting
• Steady blue: WiFi connected
Power Indicator Light
Power/Clean
• Press and hold to turn the robot
on or off
• Press to start cleaning
Dock
• Press to start docking
A5
VibraRise Mop Cloth
A6
Moisture-Proof Mat
A4
VibraRise Module
A5-1—Hook and Loop Pads
A6-1—Moisture-Proof Mat Adhesive Tape
A7
Adapter
A8
Dustbin and Water Tank
Combo Unit
A9
Charging Dock
A2-5— Main Brush
A2-6— Main Brush Cover Latches
A2-7— Main Wheels
A8-2— Dustbin Lid
A8-3— Cover Latch
A8-4— Water Tank Stopper
A8-5— Filter Handle
A8-6— Washable Filter
A8-7— Dust Outlet
A8-8— Dust Outlet Latches
A8-9— Dust Inlet
Installation
B
Important Information
A8-1—Dustbin and Water Tank Combo
Latches