Roborock S6

Installation
Using the mop
15
5. Install the mopping module.
Adjusting the water flow rate
Disposable mop cloth plate
Disposable mop cloth
1
2
Adjust the water flow rate according to your preferences.
High
Low
Install the mop cloth
a. Installing a reusable mopping cloth
Dampen the mop cloth and squeeze it dry. Slot it into the
mounting point and slide it along the groove on the water
tank then press it firmly in place.
Note: Use barrier tapes to create a border around carpets.
b. Installing a disposable mop cloth
b1. Installing the disposable mop cloth plate
Insert the disposable mop cloth plate from right to le along
the slot on the water tank as shown then press it firmly in
place.
b2. Securing a disposable mop cloth
Place the water tank on a flat surface with the disposable
mopping cloth fabric facing up. Align the cloth with the mop
cloth plate and press it down firmly. Press down on the various
locking points to secure the cloth onto the mop cloth plate.