EasyManua.ls Logo

Roborock S7 MaxV Ultra - Battery and Charging Safety; International Symbols

Roborock S7 MaxV Ultra
105 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
006
International Symbols Explanation
~ – ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]
– PROTECTIVE EARTH (Protective Ground) symbol [symbol IEC 60417-5019 (2009-02)]
Safety Information
Always use a properly grounded power outlet to minimize the risk of electric shock. If such a socket is not available, consult an electrician to
make one available.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Be sure that the supply voltage meets the requirements listed on the dock.
Only use the power cable provided with the product to prevent potential smoke, heat or fire.
Do not use the product with any type of power adapter, as this may cause danger and void the warranty.
If the dock is placed in an area susceptible to thunderstorms or with unstable voltage, take protection measures.
Unplug the power cable before placing the dock into storage.
Battery and Charging
WARNING

Related product manuals