Roborock Xiaowa - User Manual

Questions and Answers

S
shelley38Sep 3, 2025
How do I fix a fan error on my Roborock Xiaowa Vacuum Cleaner?
- Y
  ylaneSep 4, 2025
  To resolve a 'Fan error' on your Roborock Vacuum Cleaner, reset the system. This indicates that the dust collection fan has malfunctioned.
M
Molly JohnsonSep 18, 2025
What to do if my Roborock Vacuum Cleaner battery is low?
- D
  daltonkatherineSep 18, 2025
  If your Roborock Vacuum Cleaner shows a 'Battery low' message, charge it before use.
W
wisepaulSep 16, 2025
How to wipe the recharge sensor on Roborock Xiaowa Vacuum Cleaner?
- J
  Joel HallSep 16, 2025
  If your Roborock Vacuum Cleaner indicates 'Please wipe the recharge sensor', it means the recharge sensor is blocked by dust. Wipe the dust off the sensor to resolve the issue.
T
Teresa BurgessSep 14, 2025
What to do if a wheel is stuck on my Roborock Xiaowa?
- U
  upalmerSep 14, 2025
  If your Roborock Vacuum Cleaner has a wheel stuck, move the main unit to a new location and restart it.
S
sharmonSep 13, 2025
What does dock charger signal error mean on Roborock Vacuum Cleaner?
- J
  Joseph PageSep 13, 2025
  If your Roborock Vacuum Cleaner displays 'Dock charger signal error', it means the charging dock is blocked by dust or other matter. Remove any obstructions to ensure proper signaling.
A
Angela PotterSep 12, 2025
How to fix a stuck bumper on a Roborock Xiaowa Vacuum Cleaner?
- N
  Nathan JohnsonSep 12, 2025
  If the bumper on your Roborock Vacuum Cleaner is stuck, lightly tap it several times to dislodge any trapped material. If nothing is found, move the main unit to a new location and restart it.
A
Alexis RojasSep 9, 2025
What to do if Roborock Xiaowa Vacuum Cleaner is too close to a virtual wall?
- L
  Loretta MartinezSep 9, 2025
  If your Roborock Vacuum Cleaner is too close to a virtual wall when starting up, move it to a new location before beginning the cleaning cycle.
K
karinasmithSep 7, 2025
What to do if the main wheel on my Roborock Vacuum Cleaner is entangled?
- H
  Holly HuntSep 8, 2025
  If the Roborock Vacuum Cleaner's main wheel is entangled, remove and clean it. After cleaning, replace the wheel and restart the main unit.
Y
ycameronSep 5, 2025
How to clean entangled side brush on Roborock Vacuum Cleaner?
- J
  Jordan RogersSep 5, 2025
  If the Roborock Vacuum Cleaner's side brush is entangled, remove it and clean it to ensure it spins freely.
T
Troy JonesAug 21, 2025
What to do if my Roborock Xiaowa has a charging error?
- K
  Kelsey KellyAug 21, 2025
  If your Roborock Vacuum Cleaner displays a 'Charging error', use a dry cloth to wipe the charging contact points on both the main unit and the charging dock. This should help to ensure a proper connection during charging.