To Next Page
J
joseph98Sep 2, 2025
How to untangle the main brush on a Roborock Vacuum Cleaner?
- RRobin MillerSep 2, 2025
If the Roborock Vacuum Cleaner's main brush is entangled, remove the brush and clean it along with its bearings to ensure smooth operation.
How to untangle the main brush on a Roborock Vacuum Cleaner?
If the Roborock Vacuum Cleaner's main brush is entangled, remove the brush and clean it along with its bearings to ensure smooth operation.
What to do if the Roborock Xiaowa Vacuum Cleaner main unit is stuck?
If the Roborock Vacuum Cleaner's main unit is stuck, clear any obstacles around it to allow it to move freely.
What to do if my Roborock Xiaowa Vacuum Cleaner is stuck?
If the Roborock Vacuum Cleaner is stuck, move it to a new location and restart it. This error may also be caused by a dirty sensor, so check the cliff sensors and wipe them clean if necessary.
Why does my Roborock Vacuum Cleaner show a battery error?
If your Roborock Vacuum Cleaner displays a 'Battery error' message, it means the battery temperature is either too high or too low. To resolve this, wait until the battery temperature returns to a normal range before attempting to use the device again.
How to reset Roborock Vacuum Cleaner after internal error?
If your Roborock Vacuum Cleaner indicates 'Internal error', reset the system.
How to reset Roborock Xiaowa after side brush exception?
To resolve a 'Side brush exception' error on your Roborock Vacuum Cleaner, reset the system. This is due to the side brush module malfunctioning.
How to clean a blocked filter on a Roborock Xiaowa Vacuum Cleaner?
If the filter of your Roborock Vacuum Cleaner is blocked, clean it thoroughly. If the problem continues after cleaning, replace the filter with a new one.
Warnings and guidelines for battery charging and safety.
Guide to powering on the device and initial charging process.
Solution for error related to the bumper being stuck.
Solution for errors requiring relocation and restart.
Troubleshooting steps for cliff sensor errors.
Solution for errors indicating the main brush needs cleaning.
Solution for errors indicating the side brush needs cleaning.
Troubleshooting for main wheel issues.
Solutions for when the robot gets stuck.
Steps to resolve errors related to the dust bin and strainer.
Solution for errors indicating the strainer needs cleaning.
Solution for interference from magnetic fields.
General| Brand | Roborock |
|---|---|
| Model | Xiaowa |
| Category | Vacuum Cleaner |
| Language | English |
