Roborock Zeo One User Manual

12
3. Rotate the leveling feet to
obtain desired height.
4. Tighten the leveling foot bolts
to ensure the four leveling
feet are level.
Connecting the water inlet hose
1. Align the water inlet hose to
the water inlet and tighten it.
2. Connect the water inlet hose to the wa-
ter system (3/4 " faucet) and make sure
that everything is connected rmly.
3. Check the connections for leakage.
In case of leakage, please check if
the above requirements are met
and the steps are followed.
Adjusting the leveling feet
1. Press the top cover of
the washing machine
with both hands. If the
machine shakes, please
adjust the leveling feet.
2. Loosen the leveling foot
bolts by turning to the left
with a wrench.
Installation
Water inlet
Water inlet hose
External thread faucet
Water inlet hose

Roborock Zeo One Specifications

General

Type	Washer/Dryer Combo
Washing Capacity	10 kg
Drying Capacity	6 kg
Spin Speed	1400 RPM
Energy Efficiency Class	A
Noise Level (Spinning)	72 dB
Connectivity	Wi-Fi
Display Type	LED
Special Features	Steam Wash, Quick Wash