19
Body and Gasket
(Clean after each use)
Detergent Drawer
(Clean as needed)
Drain Pump Filter Element
(Clean monthly)
2. Wipe the gasket with a soft
cloth, and remove the foreign
objects (if any) from the groove.
1. Wipe the body with a soft
cloth and a detergent
that contains no corrosive
materials.
1. Press the detergent drawer button
to pull the detergent drawer out.
(Be careful not to break the glass panel)
.
1.
Press to open the drain pump
ap, and pull the emergency
drainpipe to drain the residual
water.
2. Rotate anticlockwise to take
the lter element out, and
clean the waste on it.
2. Rinse with water, pour o the
residual water, wipe the drawer
dry, and reinstall it.
Maintenance
Inlet Valve Filter
(Clean monthly)
4. Put the lter element back
into the drain pump and
tighten it, and close the
drain pump ap.
3. Check for and remove any
foreign objects from the
drain pump.
1. Turn o the tap and unscrew
the water inlet hose.
3.
Clean the threaded part of
the inlet valve with a brush.
4. Reconnect the water inlet
hose to the tap and turn on
the tap to check for leakage.
2. Take the inlet valve lter out
with needle-nose pliers and
rinse it.
To Next Page
Loading...
Need help?
General