16
SAFETY
The CL 20 has a magnetic safety device and motor
braking system. As soon as you open the lid, the
motor stops.
To restart the machine, simply close the lid and
press the green switch.
WARNING
The discs are extremely sharp.
Handle with care.
Never try to override the locking and safety
systems.
Never insert an object into the container where
the food is being processed.
Never push the ingredients down with your
hand.
Do not overload the appliance.
Never switch the appliance on when it is
empty.
REMEMBER
• WORKING HEIGHT
We recommend that you position the CL 20 on a
stable worktop so that the upper edge of the large
feed hopper is at a height of between 1.20 m and
1.30 m.
• NOISE LEVEL
The equivalent continuous sound level when the
CL 20 is operating on no-load is less than 70 dB
(A).
• ELECTRICAL DATA
Single phase machine
- Power shown on data plate.
Motor
Speed
(rpm)
Intensity
(Amp)
230 V/50 Hz 1500 5.7
115 V/60 Hz 1800 12.0
220 V/60Hz 1800 5.7
STANDARDS
Consult the declaration of compliance on page 3.
To Next Page
Loading...
