14
16/01/2020
SAFETY
• The juicer will not start unless the lid has been
correctly positioned and the safety arm properly
locked in place. The motor will switch itself off as
soon as you open the safety arm or press the Off
button (red button).
• The juicer is equipped with a powerful electric
brake which will shut the machine down in less
than 2 seconds if you open the safety arm while
the juicer is running.
• To switch your juicer back on, simply fold the
safety arm back over the lid and press the On
button (green button).
• The J 100 is fitted with a thermal protection
system which automatically switches the motor off
if it remains overloaded for any length of time.
If this happens, wait for the appliance to cool
down before resetting the thermal protection
(button on underside of the appliance).
•
WARNING: never use the appliance without
either the pulp container or the continuous
ejection chute (for the J 100).
• Always switch the machine off before removing
the pulp container or the continuous pulp ejection
chute (for the J 100).
• Never insert your hand or any object other
than the pusher into the ejector if the machine is
plugged in or the basket is rotating.
• Never unplug the appliance by tugging on the
power cord or with damp hands.
REMEMBER
• Never try to override the locking or safety
systems.
• Never introduce anything other than
fruit or vegetables into the feed tube.
• The lid of your appliance features
a unique patented Auto Feed system. Simply
introduce the food into the feed tube and let the
machine do the rest.
• Should a blockage occur inside the feed tube,
NEVER USE any object other than the pusher
to clear it. Another solution is to switch the
machine off and remove the food causing the
problem inside the tube.
• Never use your hand to push the food down into
the feed tube.
• Never insert your hand or any object other
than the pusher into the ejector if the machine is
running or the basket rotating.
TROUBLESHOOTING
J 100
The power is specified on our data plate.
Motor Speed (rpm) Intensity (Amp.)
120 V/ 60 Hz 3600 9
220 V/ 60 Hz 3600 6
230 V/ 50 Hz 3000 7
Motor Speed (rpm) Intensity (Amp.)
120 V/ 60 Hz 3600 9
220 V/ 60 Hz 3600 8
230 V/ 50 Hz 3000 8
• WORKING HEIGHT
We recommend placing the juicer on a flat, stable
work top at a suitable height.
• NOISE LEVEL
The equivalent continuous sound level when the
juicer is running empty is below 70 dB (A).
• ELECTRICAL DATA
J 80 - J 80 Buffet
SYMPTOMS CAUSES AND/OR REMEDIES
The machine will not
start.
- Check the fuses in your mains
supply.
- Close the safety arm properly.
J
100:
- Check that the thermal
protection (button on underside)
has been reset.
Abnormal noise. - The appliance has been
incorrectly assembled.
See “Assembly” chapter.
- One of the parts is faulty and
needs replacing.
Inefficient grating. - The grating disc is worn.
Replace the grating disc inside
the basket.
- There is a blockage in the feed
tube which needs to be cleared.
The appliance
vibrates.
- The pulp container is full or the
basket is out of balance due to
an accumulation of pulp on the
filter.
- If the vibration is permanent,
check that the basket has not
been damaged in some way.
The basket does not
stop immediately
when the safety arm
is opened.
It takes more than
2 seconds to stop.
- Have the appliance checked by
a qualified person.
IMPORTANT: For all repairs and maintenance, it is
vital to use parts supplied by Robot-Coupe.
STANDARDS
Consult the declaration of compliance on page 2.
To Next Page
Loading...
