Robot Coupe MP 450 Ultra - EU Declaration of Conformity

MP 350 Ultra • MP 350 V.V. Ultra • MP 450 Ultra • MP 450 V.V. Ultra
MP 550 Ultra • MP 600 Ultra • MP 800 Turbo • MP 350 Combi Ultra
MP 450 Combi Ultra • MP 450 FW Ultra • MP 450 FW XL Ultra
Robot-Coupe SNC - 12 avenue du Maréchal Leclerc – BP 134 – 71305 Montceau-les-Mines Cedex - France
Robot-Coupe
SNC :
- EN 12100 -1 & 2 - 2004: Safety of machinery –
General principles for design,
- EN 60204-1 -2006: Safety of machinery – Electrical
equipment of machines,
- EN 12852: Food Processors and Blenders,
- EN 1678-1998: Vegetable Cutting Machines,
- EN 454: Blender-Mixers,
- EN 12853: Hand-held Blenders and Whisks
(stick blenders),
- EN 14655: Bread Slicers,
- EN 13208: Vegetable Preparation Machines,
- EN 13621: Salad Spinners,
- EN 60529-2000: Degrees of protection,
- IP 55 55 for the electrical controls,
- IP 34 for the machines.
Declares that the machines identified by their type
above, comply with:
• the essential requirements of the following European
directives and with the corresponding national
regulations:
- Directive "Machinery" 2006/42/CE,
- Directive "Low voltage" 2006/95/CE,
- Directive "Electromagnetic compatibility"
2004/108/CE,
- Regulation (EC) n°1935/2004 "Materials and
articles intended to come into contact with food",
- Regulation (EU) n°10/2011 "Plastic materials and
articles intended to come into contact with food",
- Directive "Reduction of Hazardous Substances (RoHS)
2002/95/CE,
- Directive "WEEE" 2002/96/CE,
• the requirements of the European harmonized standards
and with the standards specifying the hygiene and
safety requirements:
DECLARATION OF CONFORMITY
Signed at Montceau en Bourgogne on January 3rd, 2011
Alain NODET
The Manager