Robotex AVATAR III - Powering On the Robot and Controller

 


7

Avatar®IIIUserManualRevD12/2015

D) PoweringOntheRobotandController
Robot
Thereisnoon/offswitchontherobotitself.Therobotispoweredonandoffbyinserting
andremovingthebattery.

PowerOn:Therobotispoweredonwheneverthebatteryisinstalled.
PowerOff:Therobotispoweredoffwheneverthebatteryisremoved.

Thereisathirdoptionwherethebatterymaybestoredintherobotandtherobotremains
poweredoff.Todothis,presstheredbuttonontheoppositesideoftherobotfromthe
batterybayandholduntilthebatterydoorisclosed.Ifthefansdidn’tturnon,therobotis
poweredoff.Ifyoupressthebuttonwhentherobotisalreadyonwiththebattery
installed,itdoesnothing.

Ifyou’veusedtheredbutton,simplyremovethebatteryandputitbackintopoweronthe
robot.







Controller
TheControllerhasasmallblackpowerbuttonlocatedinthetoprightcornerofthe
controller(justabovethescreen).

PowerOn:TheControllerispoweredonbypressingtheblackroundpowerbutton.
PowerOff:TheControllerispoweredoffbypressingandholdingtheblackroundpower
buttondownuntiltheLEDlightturnsoff.



