Direct Digital Controller
102 Direct Digital Controller fw 4.013 – Ed. 01/2013
4.4.2.6.9 Cooling/heating service configuration
DDC /Robur Box request enabling
This menu item permits to set, for the heating and cooling services, if the unit switching-on requests are
controlled only by the DDC, only by the optional Robur BOX (RB100 or RB200) device, or by both (DDC and
Robur BOX).
To disable the request by one of the Robur control devices, position the cursor on
and press the knob. The
symbol indicates that the request is not active.
The operation requests for the DHW services are ALWAYS controlled by the Robur Box (RB100 or RB200)
device, therefore it is not possible to enable the DHW service when this device is missing. For more
information please consult the installation and user booklet of the RB 100 (code D-LBR468) and the RB 100
applications manual (code D-LBR467), or the installation and user booklet of the RB 200 device (code D-
LBR632) and the Applications Manual (code D-LBR630), according to the type of device used.
NOTE
To Next Page
Loading...