Direct Digital Controller
108 Direct Digital Controller fw 4.013 – Ed. 01/2013
ONLY if the “BMS plant control” item is enabled in the “BUS access configuration” menu (for further
information see paragraph BUS access setup “82” on page ).
Figure 20 – MAIN CONSENTS DIAGRAM
The WeComp function (climatic curve) is not represented in the Figure 20 layout as it does not act as a
consent (On-Off) but by varying the temperature on the flow water depending on the external temperature.
The Digital Panel foresees various modalities for the management of unit operation as indicated in the table
below.
PLANT
(heating and cooling
services
To Next Page
Loading...