Roca LAURA 20 - Set-up (II)

Set-up (II)
11
10
13
This screen allows the day
to be set using button (13) and
the month with button (10).
Press the Validate Program button (11) to store the change.
This screen allows the year
to be set. To do that, press button(13).
Example on display: 2001
Press the Validate Program button (11) to store the change.
This screen displays the value on
the flue gas pressure switch
(in mbar x 10).
Example on display: 2 mm w.g.
Press the Validate Program button (11) to store the change.
If it is an open flue type waterheater, a
29 will be displayed.
Press the Validate Program button (11) for 10 seconds,
or any other button on the right-hand of the panel.
After that time-delay you will exit the Set-up mode.
52
Laura 20/20F wall-hung waterheaters
RECOMMENDED FOR TECHNICIAN ONLY